Zanussi ZZP37901XX User Manual

Contents

Zanussi ZZP37901XX User Manual Manual pdf 18 page image

Pull the front of theshelf support awayfrom the side wall.121 Pull the rear end ofthe shelf supportaway from the sidewall and remove it.2Install the shelf supports in the oppositesequence.PyrolysisCAUTION!Remove all accessories andremovable shelf supports.Do not start the Pyrolysis if you didnot fully close the oven door. Insome models, the display shows"C3" when this error occurs.WARNING!The appliance becomes very hot.There is a risk of burns.CAUTION!If there are other appliances installedin the same cabinet, do not usethem at the same time as thePyrolysis function. It can causedamage to the appliance.1. Remove the worst dirt manually.2. Clean the inner side of the door with hotwater, so that the residues do not burn fromthe hot air.3. Set the Pyrolysis function. Refer to "Ovenfunctions".flashes.4. You can use the End function to delay thestart of the cleaning procedure.5. Press or turn the knob for thetemperature clockwise to start the cleaningprocedure.Time of the procedure: 2 h.During the Pyrolysis the oven lamp is off.When the oven is at its set temperature, thedoor locks. The display shows the symboland the bars of the heat indicator until the doorunlocks.Cleaning reminderTo remind you that the Pyrolysis is necessary,PYR flashes in the display for 10 seconds aftereach activation and deactivation of theappliance.The cleaning reminder goes out:• after the end of the Pyrolysisfunction.• if you press and at thesame time while PYR flashes inthe display.Cleaning the oven doorThe oven door has four glass panels. You canremove the oven door and the internal glasspanels to clean them.The oven door can close if you try toremove the glass panels before youremove the oven door.CAUTION!Do not use the appliance without theglass panels.Open the door fullyand hold the twodoor hinges.1 Lift and turn thelevers on the twohinges.218 www.zanussi.com