Zanussi ZZP37901XX User Manual
                                                    | |
Contents
| 
Close the oven doorhalfway to the firstopening position.Then pull forward andremove the door fromits seat.3 Put the door on a softcloth on a stablesurface.4Release the lockingsystem to remove theglass panels.590° Turn the twofasteners by 90° andremove them fromtheir seats.621First lift carefully andthen remove theglass panels one byone. Start from thetop panel.7Clean the glass panels with water and soap.Dry the glass panels carefully.When the cleaning is completed, install theglass panels and the oven door. Do the abovesteps in the opposite sequence.Make sure that you put the glass panels (A, Band C) back in the correct sequence. Themiddle panel (B) has a decorative frame. Thescreen-printing zone must face the inner side ofthe door. Make sure that after the installationthe surface of the glass panel frame (B) on thescreen-printing zones is not rough when youtouch it.A B CMake sure that you install the middle panel ofglass in the seats correctly.Replacing the lampPut a cloth on the bottom of the interior of theappliance. It prevents damage to the lamp glasscover and the cavity.WARNING!Danger of electrocution! Disconnectthe fuse before you replace thelamp.The lamp and the lamp glass covercan be hot.1. Deactivate the appliance.2. Remove the fuses from the fuse box ordeactivate the circuit breaker.The back lamp1. Turn the lamp glass cover counterclockwiseto remove it.www.zanussi.com 19 |
Related manuals for Zanussi ZZP37901XX
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine