Zenith H27C46DT Installation & Operation Manual

P A G E 2 9206-3602Creating Your Own Channel LabelsPRG POWERCABLE VCR AUX TVSURFENTERFLASHBK MUTECHANNELCHANNELVOLUME VOLUME1 2 34 5 6708 9MENUREWIND FFWDRECORDQUITABCCCTV/VCRSOURCEPAUSE TIMERPLAYSTOPCustomize channel names by using your own customchannel labelsTo Program a Channel LabelFirst select a channel using the NUMBER keypad and ENTER orthe Channel Up/Down arrows, on the remote control.(To select a deleted channel, use the NUMBER keypad andENTER.)To program a channel label, press MENU repeatedly to go tothe Setup menu, then select CH LABELS.Press the Right Adjust arrow to scroll the available presetlabels. Scroll past - - - -, scroll past NONE, to go to the firstprogrammable label slot, LAB 1 (Label 1). Notice that thelabel appears with the title LAB 1, and is also on a dark back-ground; which will distinguish it from the preset labels.Operating the Custom Labels MenuUse Volume Up/Down to select the first letter.a. Press MUTE to clear the label if necessary.Use Channel Up/Down to scroll through and change the char-acter to one of the 255 characters available.Repeat Steps 4 and 5 to set characters for the other spacesavailable on the label.Press ENTER to remove menu when finished.Menu Operation Notes:Adjust Left/Right Switches to the next label.- - moves to the next or previouslabel.Volume Up/Down Selects character spaces- - moves to the next or previouscharacter space.MUTE Removes current label,- - if first character space isselected.Channel Up/Down Scrolls through the availablecharacters.ENTER Accept the channel label andremoves the menu.12343AUTO PROGRAMADD/DEL/BLNKCH. LABELSCLOCK SETCAPTIONSALARM MENULANGUAGECH 30 MYLAB364/A1/55 1/544Mini glossary- - - - The 4 dashes will allow a channel label to appear; if one is provided by the broadcaster.NONE Prevents any channel label from appearing.LAB 1, Are the 20 programmable labels. They can be customized for your needs with 5 characters spaces available on each label.thru LAB 20,62