Zenith H27C46DT Installation & Operation Manual

P A G E 4 0 206-3492-OPRG POWERCABLE VCR AUX TVSURFENTERFLASHBK MUTECHANNELCHANNELVOLUME VOLUME1 2 34 5 6708 9MENUREWIND FFWDRECORDQUITABCCCTV/VCRSOURCEPAUSE TIMERPLAYSTOPAmplifier Volume Override42Indicator LightMini glossaryAMPLIFIER An electronic device that amplifies sound from a television, CD player, VCR, or other A/V device.1234Your volume and mute keys now control your amplifier, whileall the other keys still operate the Presentation TV. To puteverything back to normal, reprogram all modes with theiroriginal codes (see the “Programming Your Remote” page).If you can’t find the code for youramplifier, use the Auto Find feature.Sets up your amplifier to beoperated in all remote controlmodes 3Find the code that operates your amplifier. Test itto make sure it’s the correct one by following theprocedure in “Programming Your Remote” on theprevious page.Program your audio system into one of the avail-able AUX modes: Aux, Aux+1, Aux+2, or Aux+3.Press and hold PRG on your remote until the indica-tor light stays lit, then release.Press 4-9-9; then ENTER on the remote. The indica-tor light will flash three times the code was accept-ed.Audio system volume/mute now appears in allmodes.Note: You can also program Cable Box Volume andMute control (if available) into your cable boxmode (CABLE or AUX mode) by repeating the stepsfor programming on the previous page but entering3-9-9, instead of a brand code, then pressingENTER.