Zenith System 3 Operating Manual & Warranty

Also see for SYSTEM 3 Series: Operating guide & warranty Operating guide and warranty Operating guide & warranty Operating guide

THE FIRST TIME YOU OPERATE YOUR TVSTEP 1. CONNECT THE POWERPlug your TV into an unswitched AC power source.The switched AC outlets found on some video equipmentwill not continue supplying power to the TV once the equip-ment is turned off. If the power to the TV is interrupted,you will have to set the clock in the TV to the current time. Do not plug TV into switched outlet on cable-TV decoderDo not plug TV into switched outlet on a VCRSTEP 2. TURN TV ONTurn the TV on by pressing OFF-ON.STEP 3. USE AUTO CH. (CHANNEL) SEARCHWhen your TV is first powered up you will see the AUTOCH. SEARCH reminder display. AUTO CH. SEARCHfinds all available channels and stores them in memory foraccess by CHANNEL (CH) Up/Down. To activate AUTOCH. SEARCH, press ADJUST (ADJ) Left/Right. Whenthe search is complete, you can watch the TV program ofyour choice.NOTES:l.The AUTO CH. SEARCH reminder display ap-pears each time you turn on your TV until it hasbeen used at least once.2. Antenna or cable must be connected to TV beforeyou use AUTO CH. SEARCH.SETUP MENU-> AUTO CH. SEARCHCH. ADD/DELCH. LABELSTUNING BANDAUTO FINE TUNECLOCK SETCAPTIONSCH. BACKGROUNDSTARTfDETERMINING TUNING BANDDeterminingTuning BandAuto Ch. Search Reminder DisplayTUNING BAND ISCH r--I IS FOUND_.UTOCH.SEAKCHHAS COMPI.ETE£TUNING BAND ISDCHANNELS FOUNDJWhile Searching forActive ChannelsYWhen Search isCompleteCH2STEREO• jWhen Returning toChannel/Audio DisplaySTEP 4. USE OTHER OPTIONSYou may want to consider using the following options:• Program the channels accessed by using CHANNEL(CH) Up/Down. Refer to CH. ADD/DEL option of the"Setup Menu" section of this operating guide for details.• Set the clock in the TV. Refer to the CLOCK SET optionof the "Setup Menu" section of this operating guide fordetails.2ss9_ 2 -- 1