Zitzi Guppy User Manual
                                        | |
Contents
| 
User manual - Zitzi Guppy I 11© Anatomic SITT ABDriving-handleInstallation of the driving-handleDepth adjustment of the driving-handleAngle adjustment of the driving-handleAngle adjustment of driving-handleInsert the attachment of the pusch-frame (A) in the provided holes under-neath the seatplate on the rear of the chassis and then tighten the screws (B).Choose between the four fixed positions.To adjust the push-frame (extend the depht of the seat) loosen the screws (B)underneath the seatplate on the roar of the chassis and adjust to the desireddepht. Tighten the screws (B).You can adjust the angle according to the seating system you are provided with.Release the the adjusters (C) on both sides. Adjust the push-frame to requiredangle and then tighten the adjusters (C).Press the buttons (D) on the inside of the driving-handle and adjust.Notice!Notice!The screw must fit into one of the four fixed positions that is available on thedriving-handle.The driving-handle shall always be in contact with the back of the seatingsystem during transportation in a vehicle.Fold the push-frameRelease the adjusters (C) and fold the push-frame forewards. Tighten the adjusters(C). |
Related manuals for Zitzi Guppy
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine