Zitzi Guppy User Manual
                                        | |
Contents
| 
User manual - Zitzi Guppy I 14© Anatomic SITT ABInstallation of casterCaster positioningInsert the pin (A) underneath the chassis as illustrated. Then mount the frontwheel house (K) using screw (B), washer (C) and the eccentric nut (D) and tighten.You kan adjust the castors in five different height positions. This allows you toadjust the castor height after positioning the driving wheels.CasterObs!OBS! Secure that the screws is properly tighten after the adjustment.Mounting of the caster on the caster house forkMount the caster (F) into one of five different positions by using the caster fork(K), the supplied axle (G), washer (H) and lock nut (I).Place the caster (F) in the caster fork (K). Provide the axle (G) with a washer (H)and lead the axle into one of the five provided holes and the caster. Mount awasher (H), lock nut (I) on the other side and tighten. Finish by placing a nutcover (J) over the lock nut. See the picture below.IJGADCBHJFKE |
Related manuals for Zitzi Guppy
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine