Zitzi Guppy User Manual
                                        | |
Contents
| 
User manual - Zitzi Guppy I 34© Anatomic SITT ABServiceCleaningFinishingMarkingWheelsRegular maintenance is important for the Guppy to funcion safe and properly.The need for service changes is dependending on use and wear. Check allmoving parts and fasteners regularly. Useoriginal parts from Anatomic SITT ABwhen reconditioning the Guppy.Work should always be done by professional and qualified staff.If you need support, you are always welcome to contact Anatomic SITT AB.The need of reconditioning varies and must be judged case by case.Go through all checkpoints at least once per year or as needed.Functional control should be performed each time the Guppy is used.Painted surfaces, wheels, front castors and handles is cleaned with cleaningsolvent. Never use paint thinner, gasoline or other solvent.After washing, all leads, confined space and drainage holes should be blown dryand spray lubricated with thin oil.Check that the CE-marking is intact and readable. The marking is located on thetubular frame.Make sure both castors and rear wheels are not worn and that they spin easilywithout noise. See page 14-21 of this manual for further information regardingwheel and caster adjustment.ReconditioningPaintTo prevent corrosion and touch up scratches, check for damages in the paint. Ifneeded, touch-up paint is available from Anatomic SITT AB. |
Related manuals for Zitzi Guppy
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine