DMS 80 / DMS 160 / DMS 240 / DMS 240 HSRwww.dallmeier.com 255.4.8.1 Max. recording pauseThe Max. recording pause function is relevant for the recording modes Motion and Contact.The function assumes an error (e. g. unsuitable configuration of motion detection or faultycontact sensor) if no recording had been triggered in a defined period. This error can triggerdisplaying of a System Message and / or sending of a Alarm Host message.No error will be assumed when a monitored recoding has been stopped in the RecordingSettings dialog.¾ Select the Max. recording pause function (Tab).Fig. 5-17 : Recording monitoring dialog/ Max. recording pause tab¾ Set the Maximum recording pause for the relevant cameras/tracks.¾ Confirm with OK.5.4.8.2 Min. Storage periodThe Min. Storage period is relevant for all recording modes.A track/recording can be defined to cover a certain period normally. Various events cancause a situation when more images have to be recorded or more memory capacity isrequired.Recording mode EventMotion More motion than expectedContact More contacts than expectedAll recording modes Elevated memory capacity required because of poor image qualityIf these events occur permanently the defined period Min. storage period can be under-run. The function assumes an error in this case and can trigger displaying of a SystemMessage and / or sending of an Alarm Host message.No error will be assumed when a track is defined too small in the Recording Settingsdialog.
