DMS 80 / DMS 160 / DMS 240 / DMS 240 HSRwww.dallmeier.com 818 Network and PAS8.1 EthernetThe network settings of the device can be configured manually or automatically assignedby a DHCP (Dynamic Host Configuration Protocol) server.Note that...... incorrect network settings (e.g. the allocation of an already used IP address) die mayresult in malfunctions.... the detected and available network speed is displayed in the Setup > System > Info >Network dialogue.... the bit rate off all IP cameras recordings is reduced when many IP cameras are usedwith a too low network speed (e.g. 10 Mbps... the default settings are used.Use DHCP inactivAllow IP-Finder configuration activFQDN SSL-Certifikate inactivIP Adress 192.168.2.230Subnet mask 255.255.255.0Data rate AutoHost name systemDomain name dallmeier.com¾ Open the Ethernet/Tokenring dialog via Setup > Network >Settings > Ethernet.Fig. 8-1¾ Note the following explanations.¾ Activate the required options.¾ Deactivate the not required options.¾ Conduct the manual or DHCP configuration, as described in the following chapters.¾ Confirm with OK.
