dallmeier DMS 80 Configuration

Also see for DMS 160: Operating instructions

Contents

dallmeier DMS 80 Configuration Manual pdf 65 page image

DMS 80 / DMS 160 / DMS 240 / DMS 240 HSRwww.dallmeier.com 65¾ Click into the field HDD% or Estimate of the camera / track.¾ Set the size of the video memory for the track.¾ Proceed analogous for all relevant tracks.¾ Confirm with OK.6.7.1.2 Secure tracks¾ The video memory for the secure tracks is defined in the Secure Tracks dialog.¾ Ensure that the Delete only modified tracks option is deactivated.¾ Ensure that enough memory capacity is available (Disk occupancy).¾ Open the Secure Tracks dialog with a click on S-Tracks….Fig. 6-42 : Secure tracks¾ Observe the following explanations.¾ Set the Number of secure tracks.¾ Set the Length (sec) of the single secure tracks.¾ Activate the Save on full option if required.¾ Activate the Wrap saved tracks option if required.¾ Finally confirm with a click on S-Tracks….NumberThe Number of s tracks should be a multiple of the number of cameras that record to anS-Track. This is necessary because S tracks are disabled (saved) in certain situations. Inthis case the recording can only be continued if a new S track is available.LengthThis value sets the recording duration of the single secure tracks in seconds. All securetracks have the same length.Save on fullWhen this option is activated every S track automatically will be secured when its memoryis expired. This option deactivates recording in a ring memory.Wrap saved tracksThis option takes effect when there is no new S track available to continue the recording(after securing an S track). If this option is activated, the oldest secure track will be reused(overwritten). If this option is deactivated, the recording of the corresponding camera in theS track will be stopped.