dallmeier DMS 80 Configuration

Also see for DMS 160: Operating instructions

Contents

dallmeier DMS 80 Configuration Manual pdf 39 page image

DMS 80 / DMS 160 / DMS 240 / DMS 240 HSRwww.dallmeier.com 39¾ Enter the User name if required.¾ Enter the Password.Before saving the settings have to be checked by transferring a test image.¾ Click test.When the transmission is successful, the test image will be displayed in a separate dialog.¾ Confirm with OK.¾ Confirm the recording configuration dialog with OK.¾ Confirm the Recording Settings dialog with OK.After reopening Recording Settings dialog, the IP camera will be labeled with a yellowsymbol (column Camera Name).HTTP request stringThe relevant IP camera is defined by means of the HTTP request string since this containsthe IP address. The request string expressions differ by manufacturer and model.l.The request string expression is provided in the documentation supplied with the camera.Example:Axis: http://xxx.xxx.xxx.xxx/jpg/image.jpgIQEye: http://xxx.xxx.xxx.xxx /now.jpg?snap=post6.3 Basic configurationThe basic configuration normally is independent from the track mode, the camera type andother settings. Exceptions will be pointed out.6.3.1 Camera and track nameIn the Camera Name column all cameras are displayed as buttons. Connected analoguecameras and configured IP cameras are labeled with a yellow symbol.Fig. 6-10 : Camera nameThe recording of every camera is done in a dedicated track. Therefore camera and trackname are the same. The camera or track name initially is the number of the correspondingvideo input. IP Cameras are labeled with an addition in the camera name.Preview imageIt is possible to display the current image of a camera for verification.¾ Right-click on a camera button.The Preview Camera x dialog will be displayed.