vacuubrand DCP 3000 Instructions For Use Manual

Also see for DCP 3000: Instructions for use

Contents

vacuubrand DCP 3000 Instructions For Use Manual Manual pdf 53 page image

page 53 of 64Calibration in the factoryTo order DAkkS calibration of the DCP 3000 with external pressuretransducer VSK 3000 / VSP 3000,order number: .............................................................................. 900215Control of measuring equipmentThe VACUUBRAND DAkkS calibration laboratory is accredited by theDeutsche Akkreditierungsstelle GmbH (national accreditation body of theFederal Republic of Germany) for the measurable variable pressure inthe pressure range from 7.5*10-4 Torr to 975 Torr (10-3 mbar to 1300mbar) in accordance with the general criteria for the operation of testinglaboratories defined in the DIN EN ISO/IEC 17025:2000 series of stan-dards (accreditation number D-K-15154-01).The DAkkS is signatory to the multilateral agreements of the Europeancooperation for Accreditation (EA) and of the International Laboratory Ac-creditation Cooperation (ILAC) for the mutual recognition of calibrationcertificates.Rely on calibration in the VACUUBRAND calibration laboratory:- To meet the requirements of the DIN ISO 9000ff and 10012 series ofstandards regarding the calibration of inspection, measuring and testequipment at specified intervals.- To document that the vacuum gauges calibrated are traceable to na-tional standards of the PTB (Physikalisch-Technische Bundesanstalt;German national institute for science and technology and the highesttechnical authority of the Federal Republic of Germany for the field ofmetrology and certain sectors of safety engineering).