Manuals database logo
manualsdatabase
Your AI-powered manual search engine

Adaptec 2130SLP - SCSI RAID Controller manuals

2130SLP - SCSI RAID Controller first page preview

2130SLP - SCSI RAID Controller

Brand: Adaptec | Category: Computer Hardware
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. System Requirements
  7. Kit Contents
  8. Adaptec RAID Features – SCSI Only
  9. About the Documentation
  10. Files and Folders
  11. Errata and Release Notes
  12. Overview of the Installation Process
  13. Cache Memory Module
  14. Storage Management Software Overview
  15. Safety Information
  16. Configuring ATA Drives
  17. ATA Cables
  18. LVD and SE Devices
  19. SCSI Termination
  20. Installing Additional Cache Memory
  21. Seating the Module – Adaptec 3200S/3400S Only
  22. Only
  23. Finishing up – All Models
  24. Zero Channel RAID Controllers (2000S, 2005S)
  25. Controller IRQ and Address
  26. Windows 2000
  27. Adding the Controller to an Existing System
  28. Upgrading Windows NT to Windows 2000
  29. Windows NT 4.0
  30. Controller
  31. Hardware
  32. Upgrading the Controller in an Existing System
  33. Changing the Driver in an Existing System
  34. Windows 95, Windows 98, and Windows Me
  35. Creating the Driver Disk
  36. Installing the Driver in a New Windows 98/Me System
  37. Adding the Controller to an Existing Windows 95/98 Me System
  38. Upgrading Windows 95 to Windows 98/Me (Upgrade Version)
  39. Installing the Driver for a Boot Controller in a New NetWare 4.11 Server
  40. Installing the Driver in a Existing NetWare
  41. NetWare 4.2 Server
  42. Server
  43. Installing the Driver for a Boot Controller in a New NetWare 5 Server
  44. SCO UNIX
  45. System
  46. FreeBSD
  47. Linux
  48. Installing the Driver in an Existing Linux System
  49. Adaptec ATA RAID 2400A
  50. Adaptec SCSI RAID 2000S
  51. Adaptec SCSI RAID 2005S
  52. Adaptec SCSI RAID 2100S
  53. Adaptec SCSI RAID 2110S
  54. Adaptec SCSI RAID 3200S
  55. Adaptec SCSI RAID 3400S
  56. Adaptec SCSI RAID 3210S/3410S
  57. Adaptec Battery Backup Module - ABM-100
  58. Adaptec Battery Backup Module - ABM-200
  59. LED During Power-up
  60. Cache Status LEDs
  61. Cache Status LED – Adaptec 3210S/3410S Only
  62. SCSI Bus Status LEDs – Adaptec 3410S Only
2130SLP - SCSI RAID Controller first page preview

2130SLP - SCSI RAID Controller

Brand: Adaptec | Category: Storage
Table of contents
  1. Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. Table Of Contents
  10. about this guide
  11. Terminology Used in this Guide
  12. About Adaptec Storage Manager
  13. System Requirements
  14. Growing Your Storage Space with Adaptec Storage Manager
  15. Continuing to Grow Your Storage Space
  16. Adding Enhanced Features
  17. Unlocking the Enhanced Features
  18. Getting Started Checklist
  19. Installing on Windows
  20. Completing a Silent Installation (Advanced)
  21. Installing on Linux
  22. Installing on NetWare
  23. Starting Adaptec Storage Manager on Windows
  24. Starting Adaptec Storage Manager on Linux
  25. Starting the Adaptec Storage Manager Agent Only
  26. Starting the Agent on Linux
  27. Understanding Permission Levels
  28. User Level
  29. Configuring NetWare User Authentication
  30. Logging Out of Adaptec Storage Manager
  31. Table Of Contents
  32. Navigating the Main Window
  33. Using Physical Devices View
  34. Using Logical Devices View
  35. Revealing More Disk Drive Information
  36. Checking System Status
  37. Working in Adaptec Storage Manager
  38. Selecting a Configuration Method
  39. Partitioning and Formatting Your Logical Drives
  40. Next Steps
  41. more information
  42. Including More Systems in Your Storage Space
  43. Building a RAID Volume
  44. RAID Controller Support
  45. Logging In to Remote Systems
  46. Creating Display Groups
  47. Setting Preferences and Changing Views
  48. Setting the Standard Unit of Measure
  49. Customizing the Adaptec Storage Manager Agent
  50. Changing a System's Event Log Setting
  51. When to Choose Bootable-CD Mode
  52. Running Adaptec Storage Manager from the CD
  53. Understanding Logical Drives
  54. Creating Logical Drives
  55. Including Different-sized Disk Drives in a Logical Drive
  56. Creating a Logical Drive Using Available Space
  57. Fine-tuning Logical Drives
  58. Changing the Write Cache Setting
  59. Changing the Read Cache Setting
  60. Changing the Initialize Priority
  61. Verifying and Fixing a Logical Drive
  62. Verifying a Logical Drive (Without Fix)
  63. Enabling/Disabling Background Consistency Check
  64. Extending a Partition on a Logical Drive
  65. Deleting a Logical Drive
  66. Working with Hot Spares
  67. Designating a Global Hot Spare
  68. Assigning a Dedicated Hot Spare
  69. What Do the Hot Spare Icons Mean
  70. protecting your data
  71. Creating a Snapshot
  72. Creating a Snapshot with Backup
  73. Enabling Copyback
  74. Monitoring Options
  75. Checking Activity in Your Storage Space
  76. Clearing the Event Log
  77. Using Event Notifications to Monitor Status
  78. Managing the Event Notification List
  79. Monitoring and Managing the Notification Log
  80. Disabling Event Notifications
  81. Managing the Email List
  82. Monitoring and Managing the Email Log
  83. Changing the Email Notification Manager Settings
  84. Disabling Email Notifications
  85. Broadcasting Event Alerts to Users
  86. Silencing and Testing the Audible Alarm
  87. Silencing the Alarm
  88. Scheduling a Task
  89. Opening the Task Manager
  90. Monitoring Tasks
  91. Modifying a Task
  92. What if a task misses its start time
  93. Disabling the Task Manager
  94. Introduction
  95. Adding a System to a Display Group
  96. Viewing Display Group Status
  97. Moving a System from One Display Group to Another
  98. Deleting a Display Group
  99. Rescanning a Controller
  100. Viewing Controller Properties
  101. Updating Controller BIOS and Firmware
  102. Setting a Disk Drive to 'Failed
  103. Replacing Disk Drives in a Logical Drive
  104. Identifying a Failed or Failing Component
  105. Failed Disk Drive Protected by a Hot Spare
  106. Failed Disk Drive Not Protected by a Hot Spare
  107. Multiple Failures in the Same Logical Drive
  108. Rebuilding Logical Drives
  109. Creating an Archive File
  110. Configuring SNMP Support on Windows
  111. Configuring SNMP Support on Linux
  112. quick answers to common questions
  113. Set up my storage space
  114. Schedule a task
  115. What's the difference between
  116. Icons in the Physical Devices View
  117. Buttons in the Physical/Logical Devices Views
  118. Understanding RAID D
  119. Table Of Contents
  120. Understanding Drive Segments
  121. RAID 1 Logical Drives
  122. RAID 1 Enhanced Logical Drives
  123. RAID 10 Logical Drives
  124. RAID 5 Logical Drives
  125. RAID 5EE Logical Drives
  126. RAID 50 Logical Drives
  127. RAID 6 Logical Drives
  128. RAID 60 Logical Drives
  129. Selecting the Best RAID Level
2130SLP - SCSI RAID Controller first page preview

2130SLP - SCSI RAID Controller

Brand: Adaptec | Category: Controller
Table of contents
  1. Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Kit Contents
  9. Overview of the Installation Process
  10. Drive Requirements
  11. Controller Features
  12. SATA RAID Controller Features Summary
  13. SCSI RAID Controller Features Summary
  14. Advanced RAID Features
  15. About the Documentation
  16. Using the Adaptec Installation CD
  17. Using the CD Autorun in Windows
  18. Installing the Adobe Acrobat Reader
  19. Software Tools Overview
  20. Electrostatic Discharge
  21. SATA Drives and Cables
  22. Installing the Controller and Drives
  23. Determining the Boot Controller
  24. Creating a Bootable RAID 5 Array
  25. Using the Adaptec RAID Configuration (ARC) Utility
  26. Installing the Driver
  27. Table Of Contents
  28. Overview of the Driver Installation Process
  29. Installing the Windows Driver
  30. Installing the Driver in an Existing Windows System
  31. Installing the Linux Module
  32. Installing the Module in an Existing Linux System
  33. UnixWare and OpenUNIX
  34. Installing the NetWare Driver
  35. Installing the Driver in an Existing NetWare System
  36. Loading NetWare Drivers During Server Restart
  37. Installing Adaptec Storage Manager on Windows
  38. Installing Adaptec Storage Manager on Linux
  39. Installing Adaptec Storage Manager on OpenServer
  40. Installing Adaptec Storage Manager on NetWare
  41. Starting Adaptec Storage Manager
  42. Linux Operating Systems
  43. OpenServer UnixWare and OpenUNIX Operating Systems
  44. Introduction
  45. Overview
  46. Physical Devices View
  47. Changing How Drives are Displayed
  48. Component Views
  49. Using the ACU
  50. Managing Arrays
  51. Initializing Drives
  52. Rescanning Drives
  53. Using SATASelect and SCSISelect
  54. Controller Configuration Options
  55. SATA Configuration Options
  56. Using the Disk Utilities
  57. Viewing the Event Log
  58. Creating the ACU Utility Disk
  59. Running the ACU Interactively
  60. Running the ACU Using Scripts
  61. Playback Mode
  62. Creating the Script File Manually
  63. Array Definition Block Keywords
  64. Channel Definition Block Keywords – SCSI only
  65. ACU Error Codes
  66. Example – Running the ACU with a Script
  67. System Requirements
  68. Creating the Firmware Floppy Disks
  69. Running the AFU from the GUI
  70. Running the AFU from the Command Line
  71. AFU Command Line – Step-by-Step
  72. command line interface
  73. Terminology
  74. All Controllers
  75. Accessing the CLI
  76. Using the CLI
  77. Managing Failover Options and Hotspares
  78. Displaying Controller Information
  79. Displaying Disk Information
  80. Displaying Array Information
  81. CLI Command Dictionary
  82. Container (Array) Commands
  83. Controller Commands
  84. Disk Commands
  85. Logfile Commands
  86. Enclosure Commands
  87. Using Automated Command Scripts
  88. about raid
  89. spanned volume
  90. SCSI Device Support
  91. Setting SCSI IDs
  92. Mixing SE Devices with LVD Devices
  93. specifications
2130SLP - SCSI RAID Controller first page preview

2130SLP - SCSI RAID Controller

Brand: Adaptec | Category: Network Card
Table of contents
  1. Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. about this guide
  8. What You Need to Know Before You Begin
  9. Kit Contents and System Requirements
  10. Kit Contents
  11. About Your RAID Controller
  12. Standard RAID Controller Features
  13. Adding Enhanced Features
  14. About the Adaptec 4000
  15. About the Adaptec 4800SAS
  16. About the Adaptec 4805SAS
  17. About the Adaptec 2420SA
  18. About the Adaptec 2820SA
  19. About the Adaptec 2130SLP
  20. About the Adaptec 2230SLP
  21. Getting Started
  22. Choosing a RAID Level
  23. Selecting Disk Drives
  24. Selecting Cables
  25. SATA Cables
  26. Installation Options
  27. Installing the Controller and Disk Drives
  28. Before You Begin
  29. Connecting Disk Drives to SAS RAID Controllers
  30. Connecting to a System Backplane
  31. Connecting Disk Drives to SATA RAID Controllers
  32. Next Steps
  33. Creating a Bootable Array
  34. Setting the Boot Controller
  35. Creating an Array with Adaptec Storage Manager
  36. Making Your Array Bootable
  37. Installing the Driver and an Operating System
  38. Creating a Driver Disk
  39. Installing with Windows
  40. Installing with SUSE Linux
  41. Installing with OpenServer
  42. Installing with UnixWare
  43. Installing the Driver on an Existing Operating System
  44. Installing on Windows
  45. Installing on OpenServer
  46. Installing on UnixWare
  47. Managing Your Storage Space
  48. About Adaptec Storage Manager
  49. About the Adaptec RAID Configuration Utility
  50. Solving Problems
  51. Troubleshooting Checklist
  52. Failed Disk Drive Protected by a Hot Spare
  53. Multiple Failures in the Same Array
  54. Introduction to Serial Attached A SCSI
  55. Introduction to Serial Attached SCSI
  56. Terminology Used in This Chapter
  57. How Do SAS Devices Communicate
  58. What's a SAS Port
  59. How are Disk Drives Identified in SAS
  60. SAS Expander Connections
  61. How is SAS Different from Parallel SCSI
  62. Understanding RAID B
  63. Understanding RAID
  64. Understanding Drive Segments
  65. RAID 1 Arrays
  66. RAID 10 Arrays
  67. RAID 5 Arrays
  68. RAID 5EE Arrays
  69. RAID 50 Arrays
  70. RAID 6 Arrays
  71. Selecting the Best RAID Level
  72. Using the Adaptec RAID C Configuration Utility
  73. Table Of Contents
  74. Running the ARC Utility
  75. Managing Existing Arrays
  76. Secure Erasing Disk Drives
  77. Modifying Your Controller's Configuration
  78. SAS-specific Controller Settings
  79. SCSI-specific Controller Settings
  80. Formatting and Verifying Disk Drives
  81. Using the Array Configuration Utility for DOS
  82. Working in the ACU Using Menus
  83. Running the ACU Using Scripts
  84. About Record Mode
  85. Array Definition Block Keywords
  86. Channel Definition Block Keywords—SCSI only
  87. ACU Error Codes
  88. Sample Scripts
  89. Using the Adaptec Flash Utility
  90. System Requirements
  91. Creating the Firmware Floppy Disks
  92. Running the AFU from the Command Line
  93. Updating the Flash Using the AFU Command Line
  94. Electrostatic Discharge (ESD)
  95. Table Of Contents
  96. DC Power Requirements
2130SLP - SCSI RAID Controller first page preview

2130SLP - SCSI RAID Controller

Brand: Adaptec | Category: Software
Table of contents
  1. Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. How This Guide is Organized
  9. Terminology Used in this Guide
  10. Part I: Getting Started
  11. Introduction to Adaptec Storage Manager
  12. Getting Started Checklist
  13. Growing Your Storage Space with Adaptec Storage Manager
  14. Continuing to Grow Your Storage Space
  15. Adding Enhanced Features
  16. System Requirements
  17. Installing and Starting Adaptec Storage Manager
  18. Installing Adaptec Storage Manager
  19. Completing a Silent Windows Installation (Advanced)
  20. Installing on Linux
  21. Installing on NetWare
  22. Starting Adaptec Storage Manager
  23. Starting Adaptec Storage Manager on Linux
  24. Starting the Agent on Linux
  25. User Level
  26. Logging Out of Adaptec Storage Manager
  27. Running Adaptec Storage Manager from the CD
  28. Exploring Adaptec Storage Manager
  29. Navigating the Main Window
  30. Using Physical Devices View
  31. Revealing More Disk Drive Information
  32. Checking System Status
  33. Working in Adaptec Storage Manager
  34. Building Your Storage Space
  35. Selecting a Configuration Method
  36. Partitioning and Formatting Your Logical Drives
  37. Including More Systems in Your Storage Space
  38. RAID Controller Support
  39. Managing Your Storage Space
  40. Customizing Adaptec Storage Manager
  41. Logging In to Remote Systems
  42. Removing a Remote System
  43. Creating Display Groups
  44. Setting Preferences and Changing Views
  45. Setting the Standard Unit of Measure
  46. Customizing the Adaptec Storage Manager Agent
  47. Changing a System's Audible Alarm Settings
  48. Changing a System's Agent Base Port Number
  49. Part II: Using Adaptec Storage Manager
  50. Managing Logical Drives and Hot 6 Spares
  51. Managing Logical Drives and Hot Spares
  52. Understanding Logical Drives
  53. Creating Logical Drives
  54. Including Different-sized Disk Drives in a Logical Drive
  55. Creating a Logical Drive Using Available Space
  56. Fine-tuning Logical Drives
  57. Changing the Write Cache Setting
  58. Changing the Initialize Method
  59. Verifying and Fixing a Logical Drive
  60. Verifying a Logical Drive (Without Fix)
  61. Increasing the Capacity of a Logical Drive
  62. Extending a Partition on a Logical Drive
  63. Changing the RAID Level of a Logical Drive
  64. Deleting a Logical Drive
  65. Working with Hot Spares
  66. Assigning a Dedicated Hot Spare
  67. What Do the Hot Spare Icons Mean
  68. Protecting Your Data
  69. Creating a Snapshot
  70. Deleting a Snapshot
  71. Monitoring Your Storage Space 8
  72. Table Of Contents
  73. Checking Activity in Your Storage Space
  74. Viewing the Full List of Events
  75. Using Event Notifications to Monitor Status
  76. Managing the Event Notification List
  77. Monitoring and Managing the Notification Log
  78. Disabling Event Notifications
  79. Setting Up Email Notifications
  80. Managing the Email List
  81. Monitoring and Managing the Email Log
  82. Changing the Email Notification Manager Settings
  83. Disabling Email Notifications
  84. Silencing and Testing the Audible Alarm
  85. Silencing the Alarm
  86. Managing Tasks
  87. Scheduling a Task
  88. Opening the Task Manager
  89. Monitoring Tasks
  90. Modifying a Task
  91. Deleting a Task
  92. Re-enabling the Task Manager
  93. Working with Display Groups
  94. Adding a System to a Display Group
  95. Removing a System from a Display Group
  96. Deleting a Display Group
  97. Managing Controllers and Disk 11 Drives
  98. Managing Controllers and Disk Drives
  99. Rescanning a Controller
  100. Viewing Controller Properties
  101. Updating Controller BIOS and Firmware
  102. Setting a Disk Drive to 'Failed
  103. Replacing Disk Drives in a Logical Drive
  104. Solving Problems
  105. Troubleshooting Adaptec Storage Manager
  106. Failed Disk Drive Protected by a Hot Spare
  107. Failure in Multiple Logical Drives Simultaneously
  108. Rebuilding Logical Drives
  109. Understanding Error and Warning Messages
  110. Configuring SNMP Support
  111. Configuring SNMP Support on Windows
  112. Configuring SNMP Support on Linux
  113. Part III: Quick Reference
  114. Quick Answers to Common Questions
  115. Set up my storage space
  116. Find the Task Manager
  117. Buttons and Icons At-a-Glance
  118. Icons in the Physical Devices View
  119. Buttons in the Physical/Logical Devices Views
  120. Selecting the Best RAID Level
  121. Selecting the Best RAID Level
  122. Comparing RAID Levels
  123. RAID 0 (Non-RAID Logical Drives)
  124. RAID 1 Logical Drives
  125. RAID 10 Logical Drives
  126. RAID 5 Logical Drives
  127. RAID 5EE Logical Drives
  128. RAID 50 Logical Drives
  129. RAID 6 Logical Drives
2130SLP - SCSI RAID Controller first page preview

2130SLP - SCSI RAID Controller

Brand: Adaptec | Category: Computer Hardware
Table of contents
  1. Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. about this guide
  8. What You Need to Know Before You Begin
  9. Kit Contents
  10. about your raid controller
  11. Standard RAID Controller Features
  12. Adding Enhanced Features
  13. About the Adaptec 3085
  14. About the Adaptec 3405
  15. About the Adaptec 3805
  16. About the Adaptec 31205
  17. About the Adaptec 31605
  18. About the Adaptec 4000
  19. About the Adaptec 4800SAS
  20. About the Adaptec 4805SAS
  21. About the Adaptec 2420SA
  22. About the Adaptec 2820SA
  23. About the Adaptec 2130SLP
  24. About the Adaptec 2230SLP
  25. getting started
  26. Choosing a RAID Level
  27. Selecting Disk Drives
  28. Selecting Cables
  29. SATA Cables
  30. SCSI Cables
  31. Installing on an Existing Operating System
  32. Before You Begin
  33. Connecting Disk Drives to SAS RAID Controllers
  34. Connecting to a System Backplane
  35. Connecting Disk Drives to SATA RAID Controllers
  36. Connecting External Devices
  37. creating a bootable array
  38. Setting the Boot Controller
  39. Creating an Array with Adaptec Storage Manager
  40. Making Your Array Bootable
  41. Creating a Driver Disk
  42. Installing with Windows
  43. Installing with SUSE Linux
  44. Installing with OpenServer
  45. Installing with UnixWare
  46. Installing with FreeBSD
  47. Installing on Windows
  48. Installing on OpenServer
  49. Installing on UnixWare
  50. Installing on FreeBSD
  51. Managing Your Storage Space 9
  52. Table Of Contents
  53. About Adaptec Storage Manager
  54. About the Adaptec RAID Configuration Utility
  55. Table Of Contents
  56. Troubleshooting Checklist
  57. Failed Disk Drive Protected by a Hot Spare
  58. Multiple Failures in the Same Array
  59. Table Of Contents
  60. Terminology Used in This Chapter
  61. How Do SAS Devices Communicate
  62. What's a SAS Port
  63. How are Disk Drives Identified in SAS
  64. SAS Expander Connections
  65. How is SAS Different from Parallel SCSI
  66. Understanding RAID B
  67. Table Of Contents
  68. Understanding Drive Segments
  69. RAID 1 Arrays
  70. RAID 10 Arrays
  71. RAID 5 Arrays
  72. RAID 5EE Arrays
  73. RAID 50 Arrays
  74. RAID 6 Arrays
  75. Selecting the Best RAID Level
  76. Using the Adaptec RAID C Configuration Utility
  77. Table Of Contents
  78. Running the ARC Utility
  79. Managing Existing Arrays
  80. Secure Erasing Disk Drives
  81. Modifying Your Controller's Configuration
  82. SAS-specific Controller Settings
  83. SCSI-specific Controller Settings
  84. Formatting and Verifying Disk Drives
  85. Viewing the Event Log
  86. for dos
  87. Getting Started
  88. Running the ACU Using Scripts
  89. About Record Mode
  90. Array Definition Block Keywords
  91. Channel Definition Block Keywords—SCSI only
  92. ACU Error Codes
  93. Sample Scripts
  94. System Requirements
  95. Creating the Firmware Floppy Disks
  96. Running the AFU from the Command Line
  97. Updating the Flash Using the AFU Command Line
  98. Adaptec 2420SA Activity LED and I2C Connector Specification
  99. Adaptec 2820SA Activity LED and I2C Connector Specification
  100. Adaptec 3085 LED and I2C Connector Specification
  101. Adaptec 3805 LED and I2C Connector Specification
  102. Adaptec 31205 LED and I2C Connector Specification
  103. Adaptec 31605 LED and I2C Connector Specification
  104. Adaptec 4800SAS LED and I2C Connector Specification
  105. Adaptec 4805SAS LED and I2C Connector Specification
  106. Electrostatic Discharge (ESD)
  107. Table Of Contents
  108. DC Power Requirements
2130SLP - SCSI RAID Controller first page preview

2130SLP - SCSI RAID Controller

Brand: Adaptec | Category: Computer Hardware
Table of contents
  1. regulatory compliance statements
  2. Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. about this guide
  9. What You Need to Know Before You Begin
  10. How to Find More Information
  11. Kit Contents
  12. System Requirements
  13. Standard RAID Controller Features
  14. Adding Enhanced Features
  15. Using a Feature Key to Unlock Enhanced Features
  16. About the Adaptec 4000SAS
  17. About the Adaptec 4800SAS
  18. About the Adaptec 4805SAS
  19. About the Adaptec 2420SA
  20. About the Adaptec 2820SA
  21. About the Adaptec 2130SLP
  22. About the Adaptec 2230SLP
  23. getting started
  24. Choosing a RAID Level
  25. Selecting Disk Drives
  26. Selecting Cables
  27. SATA Cables
  28. Installation Options
  29. Before You Begin
  30. Connecting Disk Drives to SAS RAID Controllers
  31. Connecting Directly to the Controller
  32. Connecting to a System Backplane
  33. Connecting Disk Drives to SATA RAID Controllers
  34. Connecting External Devices
  35. creating a bootable array
  36. Setting the Boot Controller
  37. Creating an Array with the ACU
  38. Creating an Array with Adaptec Storage Manager
  39. Making Your Array Bootable
  40. Creating a Driver Disk
  41. Installing with Windows
  42. Installing with Red Hat Linux
  43. Installing with NetWare
  44. Installing on Windows
  45. Installing on NetWare
  46. About Adaptec Storage Manager
  47. About the Adaptec RAID Controller Configuration Utility
  48. About the Adaptec Flash Utility
  49. Troubleshooting Checklist
  50. Silencing the Alarm
  51. Failed Disk Drive Not Protected by a Hot Spare
  52. Multiple Failures in the Same Array
  53. Introduction to Serial A Attached SCSI (SAS)
  54. Table Of Contents
  55. Terminology Used in This Chapter
  56. How Do SAS Devices Communicate
  57. What's a SAS Port
  58. What's a SAS Connector
  59. What do SAS Cables Look Like
  60. What are the SAS Connection Options
  61. SAS Expander Connections
  62. How is SAS Different from Parallel SCSI
  63. Understanding RAID B
  64. Table Of Contents
  65. Understanding Drive Segments
  66. RAID 1 Arrays
  67. RAID 1 Enhanced Arrays
  68. RAID 10 Arrays
  69. RAID 5 Arrays
  70. RAID 5EE Arrays
  71. RAID 50 Arrays
  72. RAID 6 Arrays
  73. RAID 60 Arrays
  74. Selecting the Best RAID Level
  75. Introduction to the Adaptec RAID Controller Utility
  76. Using the ACU to Create and Manage Arrays
  77. Initializing Disk Drives
  78. Secure Erasing Disk Drives
  79. Using the -Select Utility to Modify Controller Settings
  80. General Controller Settings
  81. SAS-specific Controller Settings
  82. SCSI-specific Controller Settings
  83. Formatting and Verifying Disk Drives
  84. Viewing the Event Log
  85. Getting Started
  86. Running the ACU Using Scripts
  87. About Playback Mode
  88. Creating the Script File Manually
  89. Channel Definition Block Keywords—SCSI only
  90. ACU Error Codes
  91. Sample Scripts
  92. Obtaining the Firmware
  93. Creating the Firmware Floppy Disks
  94. Running the AFU from the Command Line
  95. Updating the Flash Using the AFU Command Line
  96. Electrostatic Discharge (ESD)
  97. Table Of Contents
  98. DC Power Requirements
Adaptec categories
More Adaptec categories
Manuals database logo
manualsdatabase
Your AI-powered manual search engine