Rauch AXIS 20.2 W manuals
AXIS 20.2 W
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Intended use and declaration of conformity
- EC declaration of conformity
- User instructions
- Notes on text descriptions
- Safety
- General information on the safety of the machine
- Accident prevention
- Checks before start-up
- Operation
- Use of fertiliser
- Maintenance and repair
- Safety in traffic
- Transportation drive with the machine
- Position of safety equipment
- Function of safety devices
- Warning and instruction stickers
- Warning stickers
- Instruction stickers and nameplate
- Reflector
- Technical data
- Assembly overview AXIS 20.2, AXIS 30.2, AXIS 40.2
- Assembly overview AXIS 50.2
- Transmission for the M EMC function
- Agitator
- Machine data
- Technical data of basic equipment
- Technical data of the extensions
- List of available accessories
- TELIMAT T 25 (AXIS 20.2/30.2/40.2 only)
- Steps (AXIS 30.2, AXIS 40.2)
- Dirt deflector extension SFG-E 30.2 (only for AXIS 30.2/40.2)
- Axle load calculation
- Transportation without tractor
- Instructions regarding the spreading operation
- General commissioning (all machine types)
- Requirements for the tractor
- Fitting and removing the PTO shaft
- Installing the machine on the tractor
- Attachment
- Presetting the mounting height
- Maximum admissible mounting height at front (V) and rear (H)
- Mounting heights A and B according to fertiliser chart
- Using the fertiliser chart
- Spreading at the headland
- Spreading with section control (VariSpread)
- Setting the boundary spreading unit GSE (optional equipment)
- Adjustment of the series and/or special equipment TELIMAT
- Correcting the spreading distance
- Settings for unlisted fertiliser types
- Running one pass
- Running three passes
- Parking and unhitching the machine
- A Commissioning
- A.1.2 Dismounting the universal drive shaft
- A.2.2 Connecting the hydraulic slide actuators: Version R
- A.2.3 Connecting the electronic slide actuators: Version C
- A.3 Filling the machine
- B Spreading operation
- B.2 Using the fertiliser chart
- B.4.2 Version K/D/R/C
- B.5 Setting the working width
- B.5.2 Removing and mounting spreading discs
- B.5.3 Adjusting the drop point
- B.6 Calibration
- B.6.2 Implementing the calibration
- B.7 Checking the mounting height
- B.9 Faults and possible causes
- B.10 Discharging residual material
- C Maintenance and repair
- C.2 Lubrication of weighing spreader
- C.4 Metering slide adjustment
- C.5 Adjusting the drop point
- A.1.2 Connecting the hydraulic slide actuators: Version R
- A.1.3 Connecting the electronic slide actuators: Version Q/W/EMC
- A.2 Filling the machine
- C.2 Using the steps (Special equipement)
- C.2.3 Folding in the steps
- C.2.4 Using the steps securely
- C.3 Lubrication of weighing spreader
- C.5 Metering slide adjustment
- C.6 Adjusting the drop point
- B.4 Adjusting the application rate
- B.4.2 AXIS 50.2 W
- C.2 Using the steps
- C.6 Checking the drop point
- C.6.1 Checking AXIS 50.2 D
- C.6.2 Adjusting AXIS 50.2 D
- C.6.3 Checking AXIS 50.2 W
- General maintenance and repair (all types)
- Maintenance plan
- Opening the protective grid in the hopper
- Cleaning
- Wear parts and screw connections
- Checking the position of the spreading disc hub
- Checking the agitator drive
- Spreader vane replacement
- Gear oil (not for EMC machines)
- Checking the oil level, changing the oil
- Disposal
manualsdatabase
Your AI-powered manual search engine