Spreading operation135BAXISAXIS 20.1AXIS 30.2, AXIS 40.2B.5.3 Adjusting the drop pointWith the selection of the spreading disc type, you can specify a particular rangefor the working width. By altering the drop point, the working width can be accu-rately set and adjustments to different fertiliser types can be made.You can set the drop point via the upper scale arc. Adjusting in the direction of smaller numbers: The fertiliser is ejectedsooner. This results in spreading patterns for smaller working widths. Adjusting in the direction of larger numbers: The fertiliser is ejected laterand spread more towards the outside into the overlap zones. This results inspreading patterns for larger working widths.Figure 6: Adjustment centre for drop point1. Determine the position for the drop point in the fertiliser chart or by carryingout a test using the practice test kit (optional equipment).2. Grip the left and right handle.3. Press the pointer unit. The lock is released. The adjustment centre can be moved.4. Move the adjustment centre with the pointer to the calculated position.5. Release the pointer unit. The adjustment centre is locked.6. Ensure that the adjustment centre is locked.KDRCQWEMC
