CommissioningA128AXISAXIS 30.1, AXIS 40.1A.2 Filling the machineInstructions on filling the machine: Close the metering slide and, if applicable, the ball cocks (versions K/R). Only fill the machine when it is attached to the tractor. Make sure that thetractor is standing on level and solid ground. Secure the tractor against rolling away. Apply the handbrake. Turn the tractor motor off. Remove the ignition key. For filling heights of more than 1.25 m, fill the machine by means of suitableauxiliary equipment (e.g. front loader or screw conveyor). Fill the machine up to the edge maximally. Check the filling level e.g. with the steps being folded out or by means of theinspection window in the hopper (depending on type).Filling level scale (not for weighing spreaders)A filling level scale is installed in the hopper to monitor the filling level.This scale can be used to estimate how long spreading can continue until youmust refill the hopper.n DANGERDanger of injury from running engineWorking on the machine while the engine is running may result inserious injuries caused by mechanical components and escapingfertiliser. Switch the tractor motor off. Remove the ignition key. Ensure that nobody is present in the hazard zone.n CAUTIONInadmissible overall weightIf the permissible total weight is exceeded, this will affect the oper-ating and road safety of the vehicle (machine and tractor) and maycause serious damage to the machine and the environment. Before you start filling, calculate the amount you can load. Comply with the permissible overall weight.KDRCQWEMC
