360 Systems MAXX Operation Manual

Contents

360 Systems MAXX Operation Manual Manual pdf 78 page image

76 Remote Workstationinitiated by another. All Workstations, including the Image Server’s local GUI, have equal priorityand any can take control of a video channel at any time. Control is granted for server channelsindividually, and not automatically for all three; therefore, three Remote Workstations can eachcontrol a separate video channel.The IP address of a Remote Workstation currently controlling a channel appears in thestatus bar on the bottom-left of the Playlist or Channel window.A button labeled CONTROL appears at the upper-left of each Image Server channelwindow. Clicking this button presents a drop-down TAKE CONTROL option; click to give controlof the video channel to your workstation.A slightly different arrangement is used for Playlist windows. An OPTIONS button appears,and under it the drop-down selection TAKE CONTROL. Click on it to give control of the playlist toyour workstation.Note that GUI buttons for Control do not appear on an Image Server unless the RemoteWorkstation Interface is installed.InstallationTo install Remote Workstation software from CD-ROM:• Insert the CD-ROM into the drive on a PC.• The auto-run capability of Windows will start the Remote Workstation setup program. If it doesnot, select the Run… option of the taskbar Start Menu and type: D:\setup.exe. If necessary,replace D:\ with the drive letter of your CD-ROM.• You will be prompted to enter the IP address of the Image Server you wish to control. If youknow the address, enter it here. This information can also be entered after installation.• You will be asked to agree or disagree with the terms under which this software is licensed toyou. If you agree, installation will continue. If you do not agree, installation will stop; in theevent you do not wish to license the software, return it to 360 Systems for refund of the amountpaid for it.• Follow the prompts to finish installation.• By default, the Remote Workstation software installs all required files into the C:\ProgramFiles\IS2000 folder. However, during the installation process an alternate directory may bespecified.After InstallationA 360 Systems Remote Workstation icon will appear on your desktop. Double click theicon to open a remote session on the Image Server. To change the target Image Server you wish toaccess, right click on the Remote Workstation icon. Select “Properties” from the drop-down menu.In the “Target” text box, change the IP address listed in the box to the IP address of the ImageServer and select “OK” or “Apply.” Refer to the following figure.