78 System ConfigurationSystem ConfigurationThe Image Server provides many useful configuration settings that tailor it to operate withother equipment you own, and the kind of work you do. The location of each group of settings isassociated with its usage. There are two general types: System and Channel.Setup configuration menus can be accessed from the Main Menu > Configure choice.SystemOpen this dialog window to configure general control and sync parameters, such as GP I/O,sync, time code, and the video standard. See System Configuration below for moreinformation.Date/TimeOpen this dialog window to set the Image Server internal system date and time. Thisinformation will be used to time stamp the data files of new recordings. All channels must beidle to change the Date/Time setting.ChannelsSelect a video channel from this dropdown menu to configure channel-specific audio, video,and time code parameters. For more information about changing channel setups, see ChannelConfiguration on page 84.Many options are presented on a single screen. Some choices logically exclude others. Whenmaking certain selections, other selections may become available, unavailable, or havedifferent range limits. Options that become unavailable will be grayed out.To accept changes made to the configuration dialog box, click Apply. Click OK to acceptchanges and close the configuration dialog window. Click Cancel to close the window anddiscard any changes. Changes will become effective when the channel starts the nextrecording.
