360 Systems MAXX Operation Manual

Contents

360 Systems MAXX Operation Manual Manual pdf 89 page image

Systems Configuration 87Output ConfigurationSelect a channel from the dropdown menu. For Channel 1, select the Output tab.To accept changes made to the configuration dialog box, click Apply. Click OK to acceptchanges and close the configuration dialog window. Click Cancel to close the window anddiscard any changes. Changes to the SC/H Phase are effective immediately. Changes to theAudio Delay will be effective when the clip is reloaded.Figure 20: Channel Output Configuration WindowSC/H PhaseAdjusts the Sub-Carrier/Horizontal phase relationship. Use a vector scope to view the phaserelationship and adjust the setting. Changes to the setting are effective immediately withoutclicking Apply or OK. The adjustment range is ±90°.Audio DelayAudio timing relative to picture output can be configured for audio channels 1-2and 3-4. The value is set in millisecond increments, plus-or-minus 1,000ms (up to 1second). The setting is applied to a clip when it is loaded for playback.