3Com 3C16630A User Manual

Contents

3-44 CHAPTER 3: USING THE VT100 MA NAGEMENT INTERFACEDUA1663-0BAA03When you configure a resilient link pair, the management facility willautomatically enable Link Pulse generation (see “Port Setup” onpage 3-36) for both ports. If you subsequently delete the resilient linkpair, Link Pulse generation remains enabled.DELETE (Button) Move the cursor to this button and press [Return] todelete the resilient link pair specified by the Main Unit ID, Main Port ID,Standby Unit ID and Standby Port ID fields. You will be asked to press[Return] again for confirmation.CANCEL (Button) Move the cursor to this button and press [Return] togo back to the previous screen (either the Repeater Managementscreen or the Repeater Resilience screen).Remote PollThe Remote Poll screen allows you to see if a remote device isresponding, by sending a message forcing a response from the targetdevice. This will determine if there is a path or a congested pathbetween this device and other devices on the network. To display thescreen, actuate the REMOTE POLL button on the Main Menu screen(only available to users with manager access level or higher.)Figure 3-24 Remote Poll Screen3Com SuperStack II Remote PollPOLL CANCELIP address formatIPX address format d.d.d.dAABBCCDD:AABBCCDDEEFFThis operation will poll the target device.Target Address : [11223344:112233445566]Round Trip Time : 30 (milli-seconds)2 Router Hops