Initialization 3-49DUA1663-0BAA03InitializationThis operation is only available to users with security access level. Theinitialization operation performs a reset as described in “Reset” onpage 3-48, and in addition returns the NVRAM to its initial values. Youshould only initialize the stack if:n The configuration of the stack no longer suits your network.n Other troubleshooting efforts have failed.To display the Initialization screen, actuate the INITIALIZE button on theMain Menu screen.Figure 3-28 Initialization ScreenSelect OK to perform the initialization.CAUTION: Use this operation with great care. The unit configuration iscleared from memory and cannot be recovered. All user information(except the IP parameters) will be lost and only the default users will beavailable. All ports will be set to their hardware default values, whichmay make unused disabled ports enabled and thus available to users.This may also cause a loop through the resilient links.3Com SuperStack II InitializationOK CANCELThis operation will change the deviceback to the factory defaults.
