2 INSTALLING THETOKEN R ING LANPC CARDKit ContentsIn addition to this manual, your kit contains the followingitems:n 3Com 3C389 Token Ring LAN PC Cardn Token Ring LAN PC Card RJ-45 cablen Six TokenDisk diskettesn An shielded twisted pair (STP) connector forconnection to STP network wiringThe 3C389 PC Card cable can be purchased separately.If you want additional cables, contact your 3Commarketing representative or your place of purchase.Installation TipsIf you plan to use Card and Socket Services software,Version 2.0 or higher, install it and reboot your PC. Thesoftware may be provided with your PC or operatingsystem. See Chapter 1 for a description of these services.The README.TXT file on TokenDisk diskette #2 containsmore information to help you configure and customizethe 3C389 PC Card.Installing the 3C389 PC CardThe procedures in this section explain how to physicallyinstall the 3C389 PC Card. The installation procedure issummarized by the following sequence:n Attach the RJ-45 cable to the 3C389 PC Card.n Insert the 3C389 PC Card into the PC.n Plug the cable into the appropriate network port.
