3Com 3C389 User Manual

Contents

Windows NT 3.51 Installation 3-7Using Memory Managementn If you are using Card and Socket Services, the programwill default to Autoset mode, which allows the LANdriver to negotiate with Card and Socket Services foravailable resources. LANAID will allow you to selectvalues for resources to be used by your 3C389 PC Cardsuch as Interrupt, memory, and I/O Base Address.n If you are not using Card and Socket Services inAutoset mode, you must ensure that the values thatyou select for Interrupt, MMIO, and SRAM do notconflict with those for other PC Cards and resourcesinstalled in your PC (such as video, sound, COM port).n If you are using EMM386, in most cases the memoryexclusions will be automatically handled by LANAID.If you are using a memory manager, you must excludethe memory ranges being used by your 3C389 PCCard (8-KB default).The Microsoft Windows for Workgroups PC Card softwareinstallation is now complete.Windows NT 3.51 InstallationThe NDIS 3.0 device driver for Windows NT 3.51 orhigher requires that Service Pack 2 or higher be installedwith your Windows NT system. It will function only in aPC with an Intel 82365SL or compatible socket controller.Windows NT does not support the Databook socketcontrollers at this time. Check your PC user guide todetermine which controller is in your PC.Make sure that the 3C389 PC Card with cable attached isinserted before installing Windows NT.1 On the Windows NT desktop, open the programgroup Main.2 In the Main Window, double-click the Control Panelicon.3 In the Control Panel Window, double-click theNetwork icon.