5-10 C HAPTER 5: T ROUBLESHOOTINGDiagnostics Error Codes and Suggested ActionsInitialization Error CodesFailure during PC Card initialization usually indicates ahardware error on the PC Card. Reboot your PC using thediagnostic diskette (TokenDisk diskette #1 is a bootablediskette), and run the diagnostic program again. If the3C389 PC Card continues to fail, replace the card andcable.One of the following codes will be shown to indicate theresults of the initialization test. The error codes aredisplayed in hexadecimal format and represent theBRING_UP_CODE set by the 3C389 PC Card.0000 Initialization success0020 Diagnostics could not be executed0022 ROM diagnostics failed0024 Shared RAM diagnostics failed0026 Processor instruction test failed0028 Processor interrupt test failed002A Shared RAM interface register diagnostics failed002C Protocol-handler diagnostics failed0040 PC Card’s programmable timer for the computerfailed (set by the microcode)0042 Cannot write to shared RAM (set by microcode)0044 Reading from shared RAM read-only areacaused an incorrect error indication (interrupt)0046 Writing into shared RAM read-only area did notcause an error indication (interrupt)0048 Initialization timed out
