1-5MAC Address Table ManagementMAC Address Table Management Configuration Task ListComplete the following tasks to configure MAC address table management:Task RemarksConfiguring a MAC Address Entry RequiredSetting the MAC Address Aging Timer OptionalSetting the Maximum Number of MAC Addresses a Port Can Learn OptionalConfiguring a MAC Address EntryYou can add, modify, or remove a MAC address entry, remove all MAC address entries concerning aspecific port, or remove specific type of MAC address entries (dynamic or static MAC address entries).You can add a MAC address entry in either system view or Ethernet port view.Adding a MAC address entry in system viewFollow these steps to add a MAC address entry in system view:To do… Use the command… RemarksEnter system view system-view —Add a MAC address entrymac-address { static |dynamic | blackhole }mac-address interfaceinterface-type interface-numbervlan vlan-idRequiredz When you add a MAC address entry, the port specified by the interface argument must belong tothe VLAN specified by the vlan argument in the command. Otherwise, you will fail to add this MACaddress entry. By default, all ports belong to VLAN 1..z If the VLAN specified by the vlan argument is a dynamic VLAN, after a static MAC address isadded, it will become a static VLAN.Adding a MAC address entry in Ethernet port viewFollow these steps to add a MAC address entry in Ethernet port view:To do… Use the command… RemarksEnter system view system-view —Enter Ethernet port view interface interface-typeinterface-number —
