2-32The Telnet user names added to the RADIUS server must be in the format of userid@isp-name if youhave configured the switch to include domain names in the user names to be sent to the RADIUS serverin the RADIUS scheme.Network diagramFigure 2-3 Remote RADIUS authentication of Telnet usersConfiguration procedure# Enter system view. system-view# Adopt AAA authentication for Telnet users.[Sysname] user-interface vty 0 4[Sysname-ui-vty0-4] authentication-mode scheme[Sysname-ui-vty0-4] quit# Configure an ISP domain.[Sysname] domain cams[Sysname-isp-cams] access-limit enable 10[Sysname-isp-cams] quit# Configure a RADIUS scheme.[Sysname] radius scheme cams[Sysname-radius-cams] accounting optional[Sysname-radius-cams] primary authentication 10.110.91.164 1812[Sysname-radius-cams] key authentication aabbcc[Sysname-radius-cams] server-type Extended[Sysname-radius-cams] user-name-format with-domain[Sysname-radius-cams] quit# Associate the ISP domain with the RADIUS scheme.[Sysname] domain cams[Sysname-isp-cams] scheme radius-scheme camsA Telnet user logging into the switch by a name in the format of userid @cams belongs to the camsdomain and will be authenticated according to the configuration of the cams domain.Local Authentication of FTP/Telnet Users
