1-35[Sysname-remote-ping-administrator-tcpprivate] display remote-ping history administratortcpprivateremote-ping entry(admin administrator, tag tcpprivate) history record:Index Response Status LastRC Time1 4 1 0 2000-04-02 08:26:02.92 5 1 0 2000-04-02 08:26:02.83 4 1 0 2000-04-02 08:26:02.84 5 1 0 2000-04-02 08:26:02.75 4 1 0 2000-04-02 08:26:02.76 5 1 0 2000-04-02 08:26:02.67 6 1 0 2000-04-02 08:26:02.68 7 1 0 2000-04-02 08:26:02.59 5 1 0 2000-04-02 08:26:02.510 7 1 0 2000-04-02 08:26:02.4For detailed output description, see the corresponding command manual.UDP Test (Udpprivate Test) on the Specified PortsNetwork requirementsBoth the remote-ping client and the remote-ping server are switches. Perform a remote-ping Udpprivatetest on the specified ports between the two switches to test the RTT of UDP packets between this end(remote-ping client) and the specified destination end (remote-ping server).Network diagramFigure 1-9 Network diagram for the Udpprivate testConfiguration procedurez Configure Remote-ping Server (Switch B):# Enable the remote-ping server and configure the IP address and port to listen on. system-view[Sysname] remote-ping-server enable[Sysname] remote-ping-server udpecho 10.2.2.2 8000z Configure Remote-ping Client (Switch A):# Enable the remote-ping client. system-view[Sysname] remote-ping-agent enable# Create a remote-ping test group, setting the administrator name to administrator and test tag toudpprivate.[Sysname] remote-ping administrator udpprivate# Configure the test type as udpprivate.
