262 CHAPTER 26: AAA AND RADIUS/HWTACACS PROTOCOL CONFIGURATIONAAA andRADIUS/HWTACACSProtocolConfigurationExamplesFor the hybrid configuration example of AAA/RADIUS/HWTACACS protocol and802.1x protocol, refer to the part "802.1x".Perform the following configuration in system view.The anti-attack function of IP packets is enabled while the anti-attack function ofARP packets and dot1x packets are disabled by default.Display all global NAS-IPinformation configured in systemviewdisplay radius nas-ipDisplay the statistics of RADIUSpackets display radius statisticsDisplay the stop-accountingrequests saved in buffer withoutresponsedisplay stop-accounting-buffer { radius-schemeradius-scheme-name | session-id session-id | time-rangestart-time stop-time | user-name user-name }Reset the statistics of RADIUSserver reset radius statisticsDisplay the specified or all theHWTACACS schemes display hwtacacs [ hwtacacs-server-name ]Display the HWTACACSstop-accounting requests savedin buffer without responsedisplay stop-accounting-buffer hwtacacs-schemehwtacacs-scheme-nameDelete the stop-accountingrequests saved in buffer withoutresponsereset stop-accounting-buffer { radius-schemeradius-scheme-name | session-id session-id | time-rangestart-time stop-time | user-name user-name }Delete the HWTACACSstop-accounting requests savedin buffer without responsereset stop-accounting-buffer hwtacacs-schemehwtacacs-scheme-nameReset the statistics ofHWTACACS serverreset hwtacacs statistics { accounting | authentication| authorization | all }Enable RADIUS packet debugging debugging radius packetDisable RADIUS packetdebugging undo debugging radius packetEnable debugging of localRADIUS authentication server debugging local-server { all | error | event | packet }Disable debugging of localRADIUS authentication serverundo debugging local-server { all | error | event |packet }Enable HWTACACS debugging debugging hwtacacs { all | error | event | message |receive-packet | send-packet }Disable HWTACACS debugging undo debugging hwtacacs { all | error | event |message | receive-packet | send-packet }Table 242 Display and debug AAA and RADIUS/HWTACACS protocolOperation CommandTable 243 Enable/disable the anti-attack function of packetsOperation CommandEnable/disable the anti-attack function ofpacketsanti-attack { arp | dot1x | ip } { disable |enable }
