3Com 8807 Configuration Manual

Also see for Switch 8807: Product guide Datasheet Installation guide Product guide Command reference guide

Contents

Setting Up Configuration Environment through Modem Dial-up 37Setting UpConfigurationEnvironment throughModem Dial-upStep 1: The modem user is authenticated via the Console port of the switch beforehe or she logs in to the switch through a dial-up Modem.n By default, the password is required for authenticating the Modem user to log into the switch. If a user logs in via the Modem without password, he or she will seethe prompt "Login password has not been set !.". system-viewSystem View: return to User View with Ctrl+Z..[SW8800] user-interface aux 0[3Com-ui-aux0] set authentication password simple xxxx (xxxx is thelogin password of the Modem user.)Step 2: As shown in the figure below, to set up the remote configurationenvironment, connect the Modems to a PC (or a terminal) serial port and theswitch AUX port respectively.Figure 8 Set up remote configuration environmentStep 3: Dial for connection to the switch, using the terminal emulator and Modemon the remote end. The number dialed shall be the telephone number of theModem connected to the switch. See the two figures below.Figure 9 Set the dialed number