3Com AccessBuilder 4000 Installation Manual

Also see for AccessBuilder 4000: Installation guide

Contents

2-6 CHAPTER 2: GETTING STARTEDIf the original carton was damaged in shipment, repack the system in acarton that provides equivalent protection before returning it to 3Com.3 Verify that you have received all items included with the unit.If you have not received all items on the packing list, first check theRelease Notes for any late changes, then contact your AccessBuildersupplier for assistance.4 Verify that the AccessBuilder 4000 system's power specifications listedin Appendix A corresponds to your facility's available power source.If the available power source does not correspond to the acceptablerange, contact your AccessBuilder supplier for assistance.5 Write down the serial number of the chassis and the MAC address.The serial number and MAC address are listed on labels on the bottomof the unit. The label contains the UL listing, FCC numbers, and theserial number with a bar code.WARNING: Before powering on the system, make sure that the cover isproperly secured in place. Powering on the system without the cover inplace can result in overheating the system and the potential for electricshock.Hardware AccessBuilder 4000 ChassisRack Adapter KitPower CableBNC ConnectorSoftware 1 CD-ROMDocumentation Information RoadmapAccessBuilder 4000 Installation GuideRemote Client Installation GuideAccessBuilder Server Release NotesRemote Client Release Notesab4kbook Page 6 Thursday, March 27, 1997 11:51 AM