1 CONNECTING TO YOUR ISPThis chapter contains information about configuring your modem forvarious operating systems. Windows 95/98 operating system Windows NT 4.0 operating syste Other Operating SystemsWindows 95/98 The first time you start Windows 95/98 after you’ve installed the modem,Windows 95/98 will auto-detect your modem. Since Windows 95/98supports Plug and Play, most installations are trouble-free.You must power on your modem before you start Windows 95/98, orWindows 95/98 will not recognise your modem.What You Need You need Windows 95/98 with Dial-Up Networking installed to configureyour modem for Windows 95/98.Configuring Yourmodem with Plugand PlayPlug and Play mode allows Windows 95/98 to automatically detect yourmodem and determine which modem configuration file (called an INFfile) to use.Follow the steps below to install the INF file for Windows 95/981 Power on your computer and start Windows 95/98. Your computer willdetect new hardware.2 When the “New Hardware Found” window appears, select Driver fromdisk provided by hardware manufacturer and click OK.This step will install the INF file that is provided on the ConnectionsTMCD-ROM
