Carrier Loss Redial 5-3Carrier Loss Redial You can set the Courier V.Everything modem to redial the last-dialednumber after it loses carrier (carrier is the signal maintained between twomodems while they are on line). This feature is useful for dialed-linconnections that operate unattended.Example: Sending ATS44=20 sets a 20-second interval between losingthe connection and redialing.Answering Call Your modem can be configured to answer calls. By default, your CourierV.Everything modem will not automatically answers callsDial a number, wait 60 seconds for a connection, andthen hang up. Wait two seconds, then redial. Make amaximum of 10 attempts.To stop the repeating, press any key during the pausebetween dial attempts. If you press any key while themodem is dialing, that dial attempt is canceled but thecycle will continue>Dial the last-dialed number and repeat it just as the >command does. Also can be used to repeat anycommand.A>For your modem to CommandFor your modem to CommandDisable carrier loss redial ATS69.1=0Enable carrier loss redial ATS69.1=1Wait n seconds between losing the connection andredialing.This command also defines the interval (in seconds)between dialing attempts if the first attempt is notsuccessful.ATS44=n
