B ALPHABETIC C OMMANDS UMMARYThis appendix contains an alphabetic listing of the AT commands towhich the modem will respond. Default settings are bold.Basic Command SetCommand Function$ Display help for the Basic command set.+++ Escape code. Once your modem is online with another device,the only command it recognises is an escape code of three typedplus signs, which forces the modem back to Command mode.Do the following when issuing the command:1 Wait 1 second after sending the last item of data.2 Type +++3 Wait 1 second before typing any data.When you type +++, the modem will either hang up or stay online, depending on how you set S14.> Repeat command. If you include the repeat command in the Dialstring, the modem will dial the number and wait 60 seconds fora carrier.If the line is busy, the modem will pause for 2 seconds and thenredial. The modem makes a maximum of 10 attempts.A/ Reexecute the last-issued command. DO NOT type AT or pressEnter.A> Repeat the last-issued command until canceled by pressing anykey. DO NOT type AT or press Enter.AT Attention prefix: informs a modem that a command is coming.AT must precede all commands except A/, A>, and +++.A Force a modem to answer when it is not receiving an incomingcall.
