3Com Courier Reference

Contents

3Com Courier Reference Manual pdf 26 page image

1-12 C HAPTER 1: C ONNECTING TO YOUR ISP9 After you specify an IP Address, specify server assigned name serveraddresses, if needed:Configuring a SLIconnectionThe following steps explain how to configure Windows NT 4.0 for usewith a SLIP connection.1 Double-click Dial-Up Networking.2 Click New.3 Select the Server tab and select SLIP in the Dial-up server type box.4 Click TCP/IP settings.5 Enter the IP address provided by your ISP.6 Enter the primary DNS and secondary DNS server IP addresses in theappropriate name server address boxes.7 If your ISP requests that you use a specific frame size, select the desiredframe size in the Frame Size box.Troubleshooting RA RAS is significantly easier to troubleshoot than Win95 Dial-UNetworking, there are a finite number of problems that one runs into ona daily basis, and the majority of these are caused by misconfigurationMost connection problems can be solved by following these steps: In the Basi tab, make sure that the phone book entry settings arecorrect. Make sur Use Telephony Dialing Properties is unchecked Make sur Use another port if busy is unchecked. In the phone book settings, under security, select Accept anyauthentication including clear text. Make sure only the necessary network protocols are selected In the Connect to window, after you click Dial, there should be nodomain set. This is only for logging into NT domains.If your ISP Do thisGives you specific name serveraddressesClick Specify name server addresses andenter the server address(es) provided by yourISPDoes not give you specific nameserver addressesClick Server assigned server addresses