Quick Start 54. Select Run Automatic Configuration and press[Enter].The automatic configuration method assumes you areusing the on-board transceiver and that the 3C529Adapter Description File (ADF) is already installedon the PS/2 Reference Diskette. If this is not the case,proceed to step 5.NOTE: The ADF contains the defined set ofconfiguration options for the adapter that will allowit to function in the computer.a. When the automatic configuration is complete, exitthe program and remove the copy of the PS/2Reference Diskette.b. Reboot your computer under DOS.c. Go to the Quick Start section, “Changing 3C529Adapter Options” if you need to change softwaresettings.5. If the ADF is not on the PS/2 Reference Diskette orif you have an external transceiver, do notconfigure your computer automatically.Continue to the next section to change the computer’sconfiguration.Verifying or Changing theComputer’s ConfigurationTo verify your computer’s configuration, select ViewConfiguration from the main menu on the PS/2 ReferenceDiskette. The computer’s configuration is displayed.
