Installing the Network Drivers5-6Installing the 3C529 Adapter Drivers fora Non-NetWare NOSTo install non-NetWare NOS drivers, follow these steps:1. Return to the main menu shown in Figure 5-2.If you have exited the EtherDisk diskette, followsteps 1 through 6 in the section “Auto Installing the3C529 Adapter Driver for a NetWare NOS” to returnto the main menu.2. When the main menu screen shown in Figure 5-2appears, select Network Drivers and press[Enter].3. Select the appropriate driver for your networkoperating system and follow the instructions givenin the menu.For some operating systems, drivers are updated orcopied to the selected disk drive automatically,depending on the menu selection. For others,selecting the driver will provide you with on-lineinstructions for installing the driver.NOTE: All network adapters in the EtherLink IIIParallel Tasking adapter family use the samedrivers. The drivers are backward-compatible withother members of the family.Refer to your network operating system manuals forinstructions about using the driver with your networkoperating system.
