Troubleshooting6-10Setting Up an Echo ServerIf your echo server contains the 3C529 or 3C529-TPadapter, select the Echo Server menu item under the Testmenu, and select the command button to makethe computer an echo server.If you are setting up an echo server using a 3Com adapterother than the 3C529 or 3C529-TP adapter, followthese steps.1. Select a computer to use as an echo server.Make sure that the computer is connected to aninactive network.2. Insert the EtherDisk diskette containing the 3Comadapter diagnostic program in a floppy drive.3. Start the diagnostic program on the echo server.The diagnostic program that you use depends uponthe adapter board that is installed in the echo server.Enter 3CXXX, selecting the appropriate programfrom the following list:DiagnosticProgram Adapter3C503 EtherLink II® or II TP,EtherLink II/16 or II/16 TP3C505 EtherLink Plus®3C507 EtherLink 16 or EtherLink 16 TP3C5X9CFG All EtherLink III adapters3C523 EtherLink/MC3C523TP EtherLink/MC TP3C527 EtherLink/MC 32
