Quick Start 9Installing the Network DriversAutoLink Auto Installation of the 3C529Adapter Drivers for a NetWare ®Networking Operating System (NOS)Follow these steps to install the Novell® NetWare networkdrivers automatically if your network environment meets theNOS requirements described in Chapter 5.1. Make sure that you have installed and configuredthe adapter, and booted the computer under DOS,and have connected your computer to the network.2. If the EtherDisk diskette is already in your floppydrive, go directly to step 7. Otherwise, insert theEtherDisk diskette in a floppy drive on yourcomputer.3. Make that drive the current drive.4. Type at the prompt:INSTALL [Enter]5. The first time you use the diskette to install anadapter, a license screen appears. To accept theterms and conditions of the 3Com end-usersoftware license agreement, type the following:Y6. Read the screen and press [Enter].7. When the main menu screen appears, selectNetWare DOS ODI Client and press [Enter].NOTE: AutoLink auto installation with configurationwill take several minutes.