Troubleshooting6-6If you want to run the tests continuously, go to theRepetitions box on the Test Setup screen shown inFigure 6-5, and select Continuous (and deselect Halton Error in the Errors box). The tests will continueto run until you abort them. Refer to the section“Changing the Test Setup” for more information.Changing the Test SetupIf you want to change the test parameters, followthese steps:1. Choose Test Setup from the Test menu in themain window or use the commandbutton in the Run Tests dialog box.The Test Setup dialog box appears, similar to the oneshown in Figure 6-5.Figure 6-5. Test Setup Dialog Box
