Verifying Successful Installation 359 Click OK.n If the TCP/IP Configuration screen appears, enter therequested information for your network environment.Refer to your system administrator or the Windows NTdocumentation for assistance.n If the TCP/IP Configuration screen does not appear, theinstallation is complete.10 Remove EtherDisk diskette 2 from drive A, and thenrestart the PC.The installation is complete. Go to the next section,“Verifying Successful Installation,” to confirm that theNIC is properly installed.Verifying Successful InstallationThis section describes how to verify that the NIC and itssoftware are properly installed on your PC.Windows 95 and Windows 98To verify successful NIC installation on a PC runningWindows 95 or Windows 98:1 Open the Windows Start menu, select Settings, andthen select Control Panel.2 Double-click the System icon, and then select theDevice Manager tab.3 Double-click Network adapters and make sure thatthe name of the 3Com EtherLink NIC appears.If a red X or a yellow exclamation point (!) appears next tothe name of the NIC, the installation was not successful.See “Troubleshooting the Installation” and “FrequentlyAsked Questions” in Chapter 6 for troubleshooting help.Windows NT 4.0To verify successful NIC installation on a PC runningWindows NT 4.0:1 Double-click the My Computer icon, then theControl Panel icon, and then the Network icon.2 Select the Adapters tab.
