40 C HAPTER 4: N ETW ARE C LIENT AND S ERVER D RIVER I NSTALLATIONIntelligent Auto Install RequirementsTo use the Intelligent Auto Install program:n Make sure that your PC has only one 3C905CNIC installed.n Make sure that you are using NetWare 3.x or 4.x asyour network operating system.n Make sure that your PC has at least 1 MB of availablehard drive space.If you have more than one 3C905C NIC installed, followthe NetWare installation instructions in the 3Com NICConfiguration and Diagnostic program for DOS. (Seethe DOSDIAG.TXT file located in the HELP directory onEtherDisk diskette 3 for instructions on using this program.)Running the Intelligent Auto Install ProgramTo run the Intelligent Auto Install software to install theclient software and drivers for a NetWare network:1 Install the NIC and connect it to the network, asdescribed in Chapter 2.2 Reboot to DOS.3 Insert EtherDisk diskette 3 in drive A.4 At the DOS prompt, enter:a:installThe EtherDisk diskette main menu appears.5 Select Auto Install and Config for NetWare andpress Enter.6 Select DOS, Windows 3.1x, or Windows forWorkgroups 3.11, and follow the instructions.7 When the installation process is finished, removeEtherDisk diskette 3 and reboot the PC.If you are running Windows 3.1x, after you connect tothe NetWare server, run the WSINSTALL program for fullWindows support. Contact your system administrator forthe location of this NetWare utility.
