Verifying Successful Installation 75Verifying Successful InstallationAfter DynamicAccess software is installed, the followingchanges are visible in the Windows Network control panel:n For each physical NIC installed in the PC, a virtual NICentry appears in the list of network adapters.All protocols are re-bound to the virtual NIC. Thebindings to the physical NIC are still intact.n A 3Com DynamicAccess software entry appears asa protocol.n A 3Com DynamicAccess software icon is installed in theWindows Control Panel.Configuring DynamicAccess SoftwareContact your system administrator about usingDynamicAccess software at your site.DynamicAccess software configuration instructions areintended for network administrators who have experienceinstalling software and using management tools for anEthernet network.The instructions in this section are for configuringDynamicAccess software on a local PC. You can obtainthe complete configuration instructions by expandingthe downloadable file that contains the DynamicAccesssoftware from the 3Com World Wide Web site:http://www.3com.com/dynamicaccessTo view the complete configuration instructions you need aWeb browser. You do not need to reinstall the software.To configure DynamicAccess software on a local PC:1 Double-click the 3Com DynamicAccess icon in theWindows Control Panel.The Traffic Prioritization tab of the DynamicAccess SoftwareSetup screen (Figure 15) appears.
