108 C HAPTER 5: I NSTALLING N ETW ARE C LIENT AND S ERVER D RIVERSServer Feature CommandsDynamicAccess server feature commands for NetWare canbe used to create sophisticated configurations of groupsand for troubleshooting. You can enter them at theNetWare command line or add them to the appropriateNCF file. The commands are summarized below.As shown in the examples, all commands are preceded bythe keyword lbrsl.groupThis command creates groups from specified slotparameters for primary and secondary NICs.display statusThis command displays information about all groups, or if aprimary slot parameter is specified, only about the specifiedgroup. A separate message is displayed for each loadedframe type. Board numbers are also displayed. Informationabout the relationship between the board numbers and theframe types is shown in the NetWare 5 Console Monitor.On the Available Options screen, select LAN/WAN driversfor this information.Syntax lbrsl group lb addr RxIPAddr pri_slotsec_slot [sec_slot ...]lbrsl group rsl pri_slot sec_slot[sec_slot...]where:lb specifies a load balancing group.rsl specifies a resilient server link group.RxIPAddr is a dedicated IP address for the load balancinggrouppri_slot is the PCI slot number of the primary NIC.sec_slot is the PCI slot number of a secondary NIC.Example lbrsl group lb addr 192.1.1.100 1000110002lbrsl group rsl 10001 10002Default None
