Installing and Configuring the NetWare Server Driver 979 Select Yes at the prompt to confirm the name of thedriver to copy.The installation program copies the driver to the appropriateserver subdirectory. The Configuration screen appears.Specifying the Slot NumberYou need not specify the slot number if you are installingonly one NIC.1 In the Configuration screen, select Slot Number.2 Enter the slot number of the NIC that you want toinstall. For example:10001See Changing NetWare Driver Configuration Parameters onpage 103 for instructions on changing other parameters inthis screen.Loading the Driver1 Select Save parameters and load driver.The installation program loads the configured driver andthen writes the appropriate LOAD and BIND commands tothe AUTOEXEC.NCF file.The system assigns a network number.2 Enter a network number, or press Enter to select thesystem-assigned number.If no errors are encountered, the installation program askswhether you want to select an additional network driver.3 Select Yes to set up another NIC.Setting Up Another NIC1 Follow the prompts for another NIC: Select the driver Enter the slot number Save parameters and load the driver2 Repeat the process for all NICs to be set up.3 After all NICs are set up, press Esc several times toreturn to the Installation Options screen.
