Configuring Groups and VLANs for a Server NIC 653 Double-click the DynamicAccess SW Server icon.The DynamicAccess Resilient Server Link/LoadBalance/VLAN Configuration window appears. Clickthe appropriate tab to configure server features.Creating a Group1 Click the Load Balance/RSL tab.2 In the Load Balance/RSL window, click Create Group.3 In the Create Group dialog box, type a group name.4 Set the load balancing:To enable transmit load balancing—Clear theReceive Load Balance Enabled check box and check theTransmit Load Balance Enabled box.To enable bidirectional load balancing—Check boththe Transmit Load Balance Enabled box and theReceive Load Balance Enabled box. Enter only the Host IDbytes required for a dedicated IP address. For example:See Specifying a Dedicated IP Address on page 66 for moreinformation on the dedicated IP address.To disable all load balancing—Clear theReceive Load Balance Enabled and theTransmit Load Balance Enabled check boxes.5 Click OK.The name of the new NIC group appears in theLoad Balancing/RSL Groups list box.Byte 1 Byte 2 Byte 3 Byte 4Class A Network ID Host ID24 1 253Class B Network ID Host ID2 253Class C Network ID Host ID253
