Configuring Groups and VLANs for a Server NIC 69Disabling Load Balancing for a GroupFollow these steps to disable load balancing for a group:1 Click the Load Balance/RSL tab.2 In the Load Balance/RSL window: Select a group from the Load Balancing/RSL Groupslist. Click Properties.3 In the Group Properties dialog box:To disable receive load balancing only—Clear theReceive Load Balance Enabled check box.To disable all load balancing—Clear theReceive Load Balance Enabled and theTransmit Load Balance Enabled check boxes.4 Click OK.Changing the Primary NICThe first NIC added to an empty group is automaticallydesignated the primary NIC. NICs added subsequently aredesignated as secondary NICs. If a foreign (non-3Com) NICis used, it must be designated the primary NIC. Primarystatus is indicated by a P icon at the beginning of theNIC name.When there are more than one NIC in a group, you canchange the primary NIC as follows:1 Click the Load Balance/RSL tab.2 In the Load Balance/RSL window, select a secondaryNIC from the Load Balance/RSL Groups list.3 Click Select Primary.Removing a NIC from a GroupFollow these steps to remove a NIC from a group:1 Click the Load Balance/RSL tab.2 In the Load Balance/RSL window, select a NIC froma group in the Load Balancing/RSL Groups list.3 Click Remove NIC.
