3Com HomeConnect 3CP3647 Cli User's Manual

Also see for HomeConnect 3CP3647: Installation guide

Contents

Update Using Built-in Update Software 5-33 Power off your 3Com HomeConnect ADSL Modem Ethernet.4 Open a DOS window on your workstation.5 Change to the directory containing the new operational software. If you obtainedthe software from the Installation CD or using Instant Update the default directoryis c:\Program Files\3Com\3Com HomeConnect ADSL ModemEthernet\Update.The DL.BAT batch file uses the Com 1 port by default. You can change the portused by editing the DL.BAT file. The relevant lines of the file are shown below.REMREM Edit the pcsdl command line -v parameter so that it includesREM the REM version number of the NAC file. The version number ofREM the NAC file is part of the filename. The filename syntax is:REMREM mdxxyyzzc where xx = major version numberREM yy = minor version numberREM zz = revision numberREMREM Release 1.0.4 would have a filename of md010004.REMREMREM Change the -p option on the pcsdl command line to use theREM proper COM port.pcsdl -p1 -r%BAUDRATE% -vNA1.0.4 -vSD0.3.3 -nSDmd -nNAmdpcsdl -p1 -r%BAUDRATE% -vNA1.0.4 -vSD0.3.3 -nSDmd -nNAExecute the batch file with the following command:n dl 1156 When Establishing Communications... appears in your DOS window,plug the 3Com HomeConnect ADSL Modem Ethernet back into the outlet.7 Various status messages will be displayed, indicating the progress of thedownload. The download should take approximately 3 minutes to complete.Update Using Built-inUpdate SoftwareThe update software FTP and update software TFTP commands allow you toutilize the 3Com HomeConnect ADSL Modem Ethernet FTP or TFTP clients toobtain and install the new operational software. You can access these commandsdirectly from the serial console CLI session or through TELNET.The 3Com HomeConnect ADSL Modem Ethernet must have an IP addressconfigured in order to use the built-in update commands. See the IPConfiguration section of Chapter 3 for information on configuring IP.To update the software using the FTP command, use the CLI command:update software ftpn server n path