3Com HomeConnect 3CP3647 Cli User's Manual

Also see for HomeConnect 3CP3647: Installation guide

Contents

A CLI C OMMAND DESCRIPTIONCLI CommandsADD Use the ADD command to define:n networks you will connect ton SNMP communitiesn users who can telnet to the unitNote that some parameters have default values.add bridgeaccess_mac_addressAdds a MAC Address to the Access MAC table. When the Access MAC feature isenabled, only MAC Addresses in the Access MAC Table will be bridged.add dns serverprimary_address [ip_address]secondary_address [ip_address]Adds the IP Address of a remote DNS Server for the specified Domain Name to theDomain Name Server Table. The IP Host Name is first sent to the Primary Server tobe resolved. If that server cannot resolve the name, a request is sent to theSecondary Server.add filter Adds a filter file name to the filter table. The filter table is a managed list of filternames used by SNMP. A filter file is a text file stored in the FLASH file system, thatyou load using TFTP. Add filter also verifies the syntax of the filter file. If syntaxverification fails, you’ll receive an error message, and the filter will still be added tothe table, but is not usable. You must correct the filter file in a text editor, useParameters Description The MAC address being granted access.Parameters Description Domain name. Use * for all domains.primary_address The primary IP address of the DNS server.secondary_address The secondary IP address of the DNS server.Parameters Description The MAC address being granted access.