3Com HomeConnect 3CP3647 Cli User's Manual

Also see for HomeConnect 3CP3647: Installation guide

Contents

CLI Commands A-13n UNUSUAL - an abnormal event, which the system should recover fromn COMMON - a regularly occurring event that is not frequentn VERBOSE - a regular periodic event, e.g. a routing update messagen DEBUG - for debugging purposes onlyset interfacefilter_access [ON | OFF]input_filter output_filter Sets filter parameters for the specified protocol on the specified interface. You cansee the available filter files using list filters, view the contents of a filter file usingshow filter, and add filter files to FLASH memory using TFTP.set port pcr [number]vci [number]vpi [number]description [filter_name]input_filter [filter_name]output_filter [filter_name]Specifies bridge port parameters.Parameters Description Designation of interface you are setting parameters for. Limit of 32characters.filter_access ON causes filters specified for an interface with a set interface com mand,to override filters specified with a set user command, when the filters areof the same type.input_filter Name of filter file you wish to be applied to the input stream coming in onthe specified interface. Limit: 20 characters.output_filter Name of the filter file you wish to be applied to the output stream leavingthe specified interface. Limit: 20 characters.Parameters Description Port number (2..9)input_filter Designation of the filter file in FLASH memory to be applied to theinput data stream.output_filter Name of the filter file in FLASH memory to be applied to the out putdata stream.Pcr Peak Cell Rate (both UBR and VBR).Vci Virtual Channel Identifier.Vpi Virtual Path Identifier.